The foam worked excellent, it was on time getting here, it was easy to install and it did great job of making my house real tight. I am truly pleased and have recommended you to many.
Thanks, John C.
Augusta, MT

Last night the outside temperature was 8 degrees and my upstairs bedrooms stayed at 67+ degrees without any supplemental heating. I'm very happy with your products ease of use and quality.

Read more...

"The overwhelming amount of information made available on the website prior to purchase, as well as the reminders and links pointing to specific video or details to remember AFTER my purchase was delivered were more than enough to give me the confidence that I would end up with exactly the results that I did.

I didn't have the time immediately following delivery to install the spray foam, but that delay helped me to go over the information relayed after my purchase (prior to delivery) so that I felt comfortable with exactly how the whole process would unfold - everything went off without a hitch for me.

Jeff V.
West Allis, WI

Read more...

"I was very happy with the customer service, they answered all my questions quickly. I was also happy with how easy the product is to apply. It did take a minute or two to get the hang of how to apply it but after that quick learning period the rest of the project was a snap to complete.

I think the biggest benefit is the sealing properties. I used this to seal/insulate a sun room and even with all the windows it is the warmest room in the house."

Roger B.
Rochester, NY

"Our problem: Overhead, metal stairwell in an unheated, closed entrance way. The area was cold and damp due to condensation. Needed to correct the problems in order to enhance the appearance of entrance by adding a drop ceiling, lighting and paint. None of this could be accomplished with the problems. In addition we are a non-profit, for the most part dependent on our members for labor. So, whatever we were going to do had to be fairly simple and a reasonable cost.

We used the 202 kit to insulate the entire metal ceiling and a small wood peaked roof. The area temperature improved, although the area is still unheated, the condensation is gone and we were able to proceed with adding a drop ceiling, new lighting and painting the area. We now have a much more attractive entrance way into the building. For the cost and benefits we couldn't have done the project any other way and we did it ourselves.

Great product in many ways."

Ron M.
Downingtown, PA

"We had a contractor give us a bid on foaming our crawl spaces in the basement. However after watching the videos that Guardian Energy Technologies sent us I decided to do it myself. My two son-in-laws and myself started on a Saturday morning and we were done by that afternoon. We immediately noticed a difference in air flow from before and after the installation of the foam. We still have one more room to go but it has to be done at a warmer time. We are very happy with the results and look forward to lower energy bills in the future.

We have also talked to our Orkin man and he is unhappy because we will probably no longer need to have his services. Last year we had several mice get into our basement and since the foaming we haven't had any."

Robert L. M.
Thomson, IL

"This has been one of the best all time purchases for us, The weather is warm during the day and cool at nite, I do not have condensation problems like before. there is a 10 to 15 degree difference between the inside and out temp of my shop. With a small electric heater I am able to keep the inside temp well above 60 degrees at this present time.

Again thanks for the support and a great product."

Dale T.
Winchester, KY

"Using the spray on foam on my basement foundation was the best move I have made. Great product. Basement temp is at least 15 deg warmer down there.

Thank you for a great product."

Steve R.
Lynn, MA

"Your 602 kits were more than i could have hoped for. i do not see why anyone would want to use anything else for insulating their home or like me, a metal shop that has many dollars worth of woodworking tools, the 602 kits will solve my condensation problems.

1st : all information you have provide either on line or with the kits was most beneficial in all respects. 2nd: saving hundreds of dollars in machinery from condensation.

Dale T.
Winchester, KY

Read more...

"The product has performed well. We are noticing a dramatic reduction in the air conditioning that we use. We purchased the product primarily to seal an area in the space between the living room ceiling and the upstairs bedroom, we were experiencing loud cracking and popping noises and research could not explain why it was happening. Since adding the spray foam we have not had that problem and are convinced that we were losing either hot or cold air in that area and the outside temperature changes meeting with it would cause the structural noises. Again, we are not experiencing any of that now and it use to be a year round problem. Thank you for your service, we recommend your products to everyone we meet."

David and Kristine Z.
Las Vegas, NV

"I watched all the How-to videos, but I was a little nervous about doing it myself. I finally mustard the courage and place my first order. I order 4 units of 601 close cell form and in three days a truck delivered the order and very helpful in unloading it. The next morning I started. I re-read all the instructions and helpful hints and place the emergency phone number near the phone expecting to use it.

After about 3 hours I was finished without a hitch. It was almost fun I hated it to come to an end. I applied 2 inches of close cell foam to my workshop of 1200 square feet of wall space including all the electrical wiring and plumbing that was in the walls without a hitch. I was going to finish with 4 inches of fiberglass batt to the 6 inch walls but i change my mind after finding out how easy it was to apply the foam. I decided to finish the project with 4 units of 1200 open cell foam. Clean-up was a little messy but not difficult, I even use the spill and over fill shaving of foam by bagging it and placing it in the attic over my porch.

The how to videos and the helpful hints was the most benefit, without them I would never attempted to do the project myself. They made it look easy and it was easy."

Frank F.
Lutcher, LA

"Just wanted to let you know we used your touch up kits for a bathtub and it worked beautifully. Great product! We will be back for more. "

Thanks
Kim T.
Dillon, MT

"OMG ! Your spray foam exceeded my expectations. We bought it for the exceptional insulation properties - but WOW - what a difference it made in the noise levels. We live on a busy street and in the morning you can hear all the delivery trucks rumbling down the road - well that is you could hear them before we used the spray foam - now - peace and quiet all morning long. Thank you, thank you, thank you. Highly recommend this product to all homeowners - company is great to deal with and product is shipped quickly and easy to use. "

Robin J.
BAY SHORE, NY

"Dear reader, I did not know much about spray foam but after reading you web site, I felt like I could try it. I found the DIY tanks worked great and sq.ft. estimate was very close. Great experience with something "unknown" to me. I have told many friends about how easy the whole project was. I will be ordering more this winter to finish my project.

I actually tore a mobile home down to the frame and rebuilt it, using your spray foam insulation. I was amazed by the efficiency of the product, my home does not have any cold spots. I love the product for its easy application and great payback. Thank you!"

Steven N.
Loyal, WI

"I was simply amazed how easy and how little time it took to complete my project. Everything that I needed was included in the kit. I would recommend this product to anyone.

My wife and I used this product when we built our home on the Bay of Green Bay of WI. The winter winds off of the frozen bay are nasty and we know our house is warmer because of this product."

Doug A.
Egg Harbor, WI

"I live in Orlando Florida. My house was built in 1960 and is in the flight path for Orlando International Airport. My home had no insulation and I could hear everything outside along with very high electric bills. I took down the sheetrock and placed (2"X2") steel studs on the cinder blocks. Then I sprayed foam between the studs. I also ran furing strips on the trusses. Between the trusses I put 2" foam board. Then I sprayed foam on the foam board. This project is a payday to payday project that has gone on for the last 7 months. I'm living in the home as I work on it. So I have been watching my electric bill slowly go down as the weather has gotten warmer.

David S.
Orlando, FL

Read more...

I have finished the crawl space job. The foam and application process went very well. I was skeptical with how easy you had indicated the installation would be; however I found it to be just that easy. The only slight issue we had was keeping the material above freezing this time of year. Very happy with the product and the fact we could do it my self. I would use the product for future project.

Bill H.
Salisbury, MD

Well I worked for 11 year in a seating factory so I was a little concerned about he chemicals knowing the danger of tdi. But this i don't know how you do it but I didn't smell it at all. It went on really easy and even. I was impressed to say the least. I needed to do my crawl space and it was too small to do any other way. It made a word of difference. Thanks I would recommend it to anybody. Easy installation.

Todd S.
Marion, MI

I would like to submit a video testimonial for your contest. I think you do it quarterly but I am not sure. I am almost done with this project and though I would put it on video and let others know about your product.


Carl W.
Yampa, CO

I used Foam it to insulate the ends of the floor joists after I built a basement under my house. I knew temperature was critical, but I also knew that I wasn't getting a warmer day before spring. The basement temperature was approximately 60 degrees, the outside temperature was just above 40, and the product at 75 degrees. The kit worked better than I expected. The foam stuck tight where I sprayed it, but the overspray/splashback (which was minimal) cleaned up easily. Partway through the spray pattern changed, so I removed the mixing nozzle to find a bit of foam inside. A new nozzle and I was back in business. The excess foam trimmed off nicely with a masonry trowel that was heated with a propane torch. I am very pleased with the product, and will use it again. Also, I had a quote from a local company to spray the foam for exactly twice what it cost me to do it myself.

High r-value per inch, and expands fast enough to let you close larger holes with several applications.

Larry M.
New Paris, PA

We have installed 11 units on the underside of the metal roof (3200 sq ft) and are very pleased with the results. I will probably use the remaining unit to touch up and "smooth out" the underside, which will be exposed to the interior, so that it does not just sit there unused. I am considering doing the 2 x 6 walls next year after I have saved enough money but so far have been very satisfied.

In fact, a buddy of mine, Chad Shirey of Oil City, PA came out and tried the system and really liked it. He will be taking pictures to show prospective clients of his business and has signed up with you guys for the contractor program. Thanks for all your assistance..

Andy S.
Cranberry, PA

I just wanted you to know how fast your product arrived, how great and important the videos were, how easy to use with the proper set up and safety equipment I learned about on those videos, and how wonderful your customer service is. All told, you were very right on the mark when you stated that if you can spry water from a garden hose, you can use green spray. The product is phenomenal.

Now, granted, it has only been 2 weeks, but there is a noticeable difference is the temperature in this cottage. right now, the outside temp is 48, but the inside temp is 73, and no heat is on. That temp is holding from the daytime warming, and is holding. Great product - I'll let you know how the product works during the winter here on Peaks Island, Maine

Tim M.
Peaks Island, ME

At first, i was hesitant about spraying properly, but the videos made me much more hopeful and eager to spray. I was unsure whether the temperature and moisture would affect the spray, but the videos showed me shortcuts, preparation and setup that was so quick and easy that my first day was a breeze. I was on my back spray a roof storage area. Cleanup was simple and my wife was impressed. My next challenge was the crawlspace under my house, and that was even easier with the 30' hose. Your videos explained so much, that I had no problem with any part of the projects.

Benefits: Since spraying both locations (crawl and roof), the temperature in the house has risen 10 degrees during the night, but remained the same outside (45 degrees). The ease of spraying, cleanup, and benefits completely fooled me but saved me a weeks labor and costs of all the material I would need.

Timothy M.
Peaks Island, ME

The foam kit was delivered in the time they said, the instructions were clear and easy to follow. Results were exactly as I imagined having it never used before. I used my kit to insulate ductwork that was not otherwise accessible for insulation!

Looking like the man on the moon with all the gear the mask and the respirator. The odor was not bad adn gone pretty fast after I was done spraying. Results were good. It was very easy to use, wish the kit could be cheaper but when I see how much the shipping is because it is two pressurized vessels than I must say that I would be willing to pay it again.

Helmut S.
Ruckersville, VA

The foam it green experiance was nothing but spectacular.

Ease of use was incredible.

Dominic C.
Franklin Square, NY